Parameterfile Agglomeration of Block-Structured Meshes

From HOPR
Jump to: navigation, search








Tis parameter file can be found in

tutorials/3-01-agglomeration_NACA/parameter.ini

See Block-Structured Meshes for a detailed description. The parameter file must not follow a given structure. If mandatory parameters are not given, an error message will be shown.

Parameterfile

! =============================================================================== !
! OUTPUT
! =============================================================================== !
  projectname=NACA0012                   ! name of the project (used for filenames)
  Debugvisu    =T                        ! Write debug mesh to tecplot file
 
   DebugvisuLevel=2                      ! Level 0: visualization of linear mesh and BC (default), 
                                         ! Level 1: + curved surface visualization (_SplineSurf.*), if useCurveds
                                         ! Level 2: + curved volume visualization (_SplineVol.*), if useCurveds
 
     Visu_sJ_limit= 1.0                  ! for DebugvisuLevel=2, only write elements with a scaled Jacobian < given limit
   NVisu        = 5                      ! number of visualization points  per element edge, if useCurved
   outputFormat = 1                      ! 0: paraview, 1: tecplot ascii, 2: cgns
 
  checkElemJacobians=T                   ! checks the Jacobian and scaled Jacobian for each element
! =============================================================================== !
! MESH
! =============================================================================== !
Mode      = 3                             ! 1 Cartesian 3 CGNS 4 STAR-CD V3 
  nZones       = 5                        ! number of zones
  nMeshFiles   = 1                        ! number of meshfiles
  FileName     = NACA0012_icem_32elems.cgns  ! (max. factor 8)
!  FileName     = NACA0012_icem_viscous_32elems.cgns ! name of BLOCK-STRUCTURED CGNS mesh file (max. factor 4)
 
meshscale=0.001                     ! scales all input meshes by a factor
spacequandt=10000.                  ! tolerance for mesh connectivity (multiplicates with real tolerance)
 
!=============================================================================== !
! CURVING BY AGGLOMERATION 
!=============================================================================== !
useCurveds   =T                          ! T if curved boundaries defined
MeshIsAlreadyCurved=T                    ! this enables the agglomeration 
BoundaryOrder=3                          ! =3: agglomerates 2x2x2 linear elements to 1 curved element
                                         ! =5: agglomerates 4x4x4 linear elements to 1 curved element
 
nskip=2                                  ! coarsen block-structured meshes: skip points 1: no skip, 2: use every second point ...
nskipZ=2                                 ! if mesh is z-extruded, a different skip can be given in z-direction
 
!=============================================================================== !
! BOUNDARY CONDITIONS
!=============================================================================== !
BoundaryName=BC_OUTFLOW 
BoundaryType=(/2,0,1,0/)
BoundaryName=BC_INFLOW
BoundaryType=(/2,0,1,0/)
BoundaryName=BC_WALL
BoundaryType=(/4,1,1,0/)
BoundaryName=BC_ZMINUS
BoundaryType=(/2,0,0,1/)
BoundaryName=BC_ZPLUS
BoundaryType=(/2,0,0,-1/)
BoundaryName=DEFAULT  
BoundaryType=(/0,0,0,0/)
 
 
nCurvedBoundaryLayers = 1
 
!=============================================================================== !
! CORRECTION FOR Z-EXTRUDED MESHES ONLY!
!=============================================================================== !
 dozcorrection=F    ! align all elements exactly along z-direction (to suppress grid generator tolerances) 
   zLength=1.0      ! change length of domain in z direction
   zstart=0.        ! change minimum z-coordinate
   nElemsZ=1        ! the number of curved elements
   zperiodic=T      ! change z_plus und z_minus boundary conditions to periodic BCs

Screen Output

After executing the upper parameter file with the external mesh NACA0012_icem_32elems.cgns the following output will be shown:

====================================================================================================================================
           _______     _______    ___________________    ___________________   ___________________                         xX    
          /      /)   /      /)  /                  /)  /                  /) /                  /)     .xXXXXXXXXx.       X     
         /      //   /      //  /      _____       //  /      _____       // /      _____       //    .XXXXXXXXXXXXXXXx  .XXXXx  
        /      //   /      //  /      /)___/      //  /      /)___/      // /      /)___/      //   .XXXXXXXXXXXXXXXXXXXXXXXXXXx 
       /      //___/      //  /      //   /      //  /      //___/      // /      //___/      //  .XXXXXXXXXXXXXXXXXXXXXXXX´     
      /                  //  /      //   /      //  /                  // /                  //  .XX``XXXXXXXXXXXXXXXXXX´        
     /      _____       //  /      //   /      //  /      ____________// /      __      ____//   XX`  `XXXXX`      .X´           
    /      /)___/      //  /      //   /      //  /      /)___________) /      /)_|    |____)   XX     XXX`       .´             
   /      //   /      //  /      //___/      //  /      //             /      //  |    |__     ,X`    XXX´                       
  /      //   /      //  /                  //  /      //             /      //   |      /)   ,X`   .XX´                         
 /______//   /______//  /__________________//  /______//             /______//    |_____//   ,X`   XX´                           
 )______)    )______)   )__________________)   )______)              )______)     )_____)   xX    XXx                            
 
====================================================================================================================================
------------------------------------------------------------------------------------------------------------------------------------
 INIT OUTPUT...
 | Reading from file "parameter.ini":
 |                    projectname |                          NACA0012 | *CUSTOM | 
 |                        Logging |                                 F | DEFAULT | 
 |                      DebugVisu |                                 T | *CUSTOM | 
 |                 DebugVisuLevel |                                 2 | *CUSTOM | 
 |                   OutputFormat |                                 0 | *CUSTOM | 
 |                  Visu_sJ_limit |                       0.10000E+01 | DEFAULT | 
 |                       sfc_type |                           hilbert | DEFAULT | 
 |                      doSortIJK |                                 F | DEFAULT | 
 |           useSpaceFillingCurve |                                 T | DEFAULT | 
 INIT OUTPUT DONE!
------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------
 INIT MESH...
 |                     useCurveds |                                 T | *CUSTOM | 
 |                  BoundaryOrder |                                 3 | *CUSTOM | 
 |                           Mode |                                 3 | *CUSTOM | 
 |                         nZones |                                 5 | *CUSTOM | 
 |            meshIsAlreadyCurved |                                 T | *CUSTOM | 
 |                          nskip |                                 2 | *CUSTOM | 
 |                         nskipZ |                                 2 | *CUSTOM | 
 |                     nMeshFiles |                                 1 | *CUSTOM | 
 |               BugFix_ANSA_CGNS |                                 F | DEFAULT | 
 |                       FileName |        NACA0012_icem_32elems.cgns | *CUSTOM | 
 |                   preScaleMesh |                                 F | DEFAULT | 
 |                  postScaleMesh |                                 F | DEFAULT | 
 |                      meshScale |                       0.10000E-02 | *CUSTOM | 
 |                    SpaceQuandt |                       0.10000E+05 | *CUSTOM | 
 |                 rebuildCurveds |                                 F | DEFAULT | 
 |          doExactSurfProjection |                                 F | DEFAULT | 
 |          nCurvedBoundaryLayers |                                -1 | DEFAULT | 
 |                   BoundaryName |                        BC_OUTFLOW | *CUSTOM | 
 |                   BoundaryType |      Integer array of size (   4) | *CUSTOM |     2    0    1    0
 |                   BoundaryName |                         BC_INFLOW | *CUSTOM | 
 |                   BoundaryType |      Integer array of size (   4) | *CUSTOM |     2    0    1    0
 |                   BoundaryName |                           BC_WALL | *CUSTOM | 
 |                   BoundaryType |      Integer array of size (   4) | *CUSTOM |     4    1    1    0
 |                   BoundaryName |                         BC_ZMINUS | *CUSTOM | 
 |                   BoundaryType |      Integer array of size (   4) | *CUSTOM |     2    0    0    1
 |                   BoundaryName |                          BC_ZPLUS | *CUSTOM | 
 |                   BoundaryType |      Integer array of size (   4) | *CUSTOM |     2    0    0   -1
 |                   BoundaryName |                           DEFAULT | *CUSTOM | 
 |                   BoundaryType |      Integer array of size (   4) | *CUSTOM |     0    0    0    0
 |                        MeshDim |                                 3 | DEFAULT | 
 |                  doZcorrection |                                 F | *CUSTOM | 
 |                        OrientZ |                                 F | DEFAULT | 
 |                     SplitToHex |                                 F | DEFAULT | 
 |                      nFineHexa |                                 1 | DEFAULT | 
 |                 MeshPostDeform |                                 0 | DEFAULT | 
 |                 ConformConnect |                                 T | DEFAULT | 
 |             checkElemJacobians |                                 T | *CUSTOM | 
 |              jacobianTolerance |                       0.10000E-15 | DEFAULT | 
 INIT MESH DONE!
------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------
 INIT BASIS...
 |                          nVisu |                                 5 | *CUSTOM | 
 |                       nAnalyze |                                 4 | DEFAULT | 
 INIT BASIS DONE!
------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------
 INIT SEARCH...
 |               nElemsNodeSearch |                                25 | DEFAULT | 
 |               RefineSideSearch |                       0.80000E+01 | DEFAULT | 
 INIT SEARCH DONE!
------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------
 THE FOLLOWING INI-FILE PARAMETERS WERE IGNORED:
 |- zlength=1.0
 |- zstart=0.
 |- nelemsz=1
 |- zperiodic=T
------------------------------------------------------------------------------------------------------------------------------------
====================================================================================================================================
 
                                              Entering fillMesh 
 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reading CGNS mesh...
 CGNS version:   2.40000010    
Read Zone domain.00001, with block elem size:      80      32       8
 BC associated:BC_ZMINUS-->BC_ZMINUS
 BC associated:BC_ZMINUS-->BC_ZMINUS
 BC associated:BC_OUTFLOW-->BC_OUTFLOW
 BC associated:BC_ZPLUS-->BC_ZPLUS
 BC associated:BC_OUTFLOW-->BC_OUTFLOW
 BC associated:BC_ZPLUS-->BC_ZPLUS
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 WARNING: Block face has multiple boundary faces, BoundaryName: DEFAULT_SUBFACE
 BC associated:DEFAULT_SUBFACE-->DEFAULT
Read Zone domain.00002, with block elem size:      32       8     128
 BC associated:BC_ZMINUS-->BC_ZMINUS
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZMINUS-->BC_ZMINUS
 BC associated:BC_ZPLUS-->BC_ZPLUS
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 WARNING: Block face has multiple boundary faces, BoundaryName: DEFAULT_SUBFACE
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
 BC associated:BC_ZPLUS-->BC_ZPLUS
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
Read Zone domain.00003, with block elem size:      32     192       8
 BC associated:BC_ZMINUS-->BC_ZMINUS
 BC associated:BC_ZMINUS-->BC_ZMINUS
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:BC_OUTFLOW-->BC_OUTFLOW
 BC associated:BC_ZPLUS-->BC_ZPLUS
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:BC_OUTFLOW-->BC_OUTFLOW
 BC associated:BC_ZPLUS-->BC_ZPLUS
 BC associated:BC_INFLOW-->BC_INFLOW
 BC associated:BC_INFLOW-->BC_INFLOW
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
 BC associated:BC_INFLOW-->BC_INFLOW
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_INFLOW
 BC associated:BC_INFLOW-->BC_INFLOW
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_INFLOW
 BC associated:BC_INFLOW-->BC_INFLOW
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_INFLOW
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
 BC associated:BC_INFLOW-->BC_INFLOW
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_INFLOW
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 WARNING: Block face has multiple boundary faces, BoundaryName: DEFAULT_SUBFACE
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
 BC associated:BC_INFLOW-->BC_INFLOW
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_INFLOW
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_INFLOW-->BC_INFLOW
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_INFLOW
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
Read Zone domain.00004, with block elem size:       8      64       8
 BC associated:BC_ZMINUS-->BC_ZMINUS
 BC associated:BC_ZMINUS-->BC_ZMINUS
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:BC_ZPLUS-->BC_ZPLUS
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:BC_ZPLUS-->BC_ZPLUS
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
 BC associated:BC_WALL-->BC_WALL
WARNING: corrupted pointrange found on Boundary BC_WALL ( BC_on_SF60, domain.00004 )
 BC associated:BC_WALL-->BC_WALL
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_WALL
 BC associated:BC_WALL-->BC_WALL
WARNING: corrupted pointrange found on Boundary BC_WALL ( BC_on_SF63, domain.00004 )
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
 BC associated:BC_WALL-->BC_WALL
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_WALL
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
 BC associated:BC_WALL-->BC_WALL
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_WALL
 BC associated:BC_ZMINUS-->BC_ZMINUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZMINUS
 BC associated:BC_ZPLUS-->BC_ZPLUS
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_ZPLUS
 BC associated:BC_WALL-->BC_WALL
 WARNING: Block face has multiple boundary faces, BoundaryName: BC_WALL
Read Zone domain.00005, with block elem size:      16      32       8
 BC associated:BC_ZMINUS-->BC_ZMINUS
 BC associated:BC_ZMINUS-->BC_ZMINUS
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:BC_ZPLUS-->BC_ZPLUS
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:DEFAULT_SUBFACE-->DEFAULT
 BC associated:BC_ZPLUS-->BC_ZPLUS
 BC associated:DEFAULT_SUBFACE-->DEFAULT
DONE!   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   [ time: .032s ]
 Number of Elements:         1728
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WRITING THE DEBUGMESH...
   #Elements         1728
   WRITE DATA TO VTX XML BINARY (VTU) FILE... NACA0012_Debugmesh.vtu   DONE
    Mesh visualized for debug purposes in file : NACA0012_Debugmesh
DONE!   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   [ time: .004s ]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WRITING THE BC MESH...
   #BCSides         1928
   WRITE DATA TO VTX XML BINARY (VTU) FILE... NACA0012_Debugmesh_BC.vtu   DONE
    Boundary mesh visualized for debug purposes in file : NACA0012_Debugmesh_BC
DONE!   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   [ time: .004s ]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Mesh connect starts
Count sides, delete Null BCs and check periodic BCs...
-----------------------------------
number of sides          :        10368
number of Inner sides    :         8440
number of BC sides       :         1928
number of periodic sides :            0
-----------------------------------
Insert periodic sides...
Eliminate multiple Nodes...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GLOBAL UNIQUE NODES ...
   All Nodes sorted...
   Number of nodes to check:        18845
    size of tolerance box:                    1
  Number of deleted nodes        1065
  Number of unique nodes       17780
DONE!   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   [ time: .028s ]
Connect Conforming inner and periodic sides...
    -->         8440  sides of         8440   sides connected.
Mesh Connect completed with success.  
DONE!   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   [ time: .037s ]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
BUILD EDGES ...
DONE!   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   [ time: .002s ]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GLOBAL UNIQUE NODES ...
   All Nodes sorted...
   Number of nodes to check:        17780
    size of tolerance box:                    1
  Number of deleted nodes           0
  Number of unique nodes       17780
DONE!   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   [ time: .030s ]
 =======================CHECK NODE CONNECTIVITY =========================================
###### CHECK CORNER NODES
###### CHECK EDGE CURVED NODES
###### CHECK SURFACE CURVED NODES
SORT ELEMENTS ON SPACE FILLING CURVE, TYPE hilbert ...
... DONE
 write space filling curve to sfc.dat
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WRITING THE DEBUGMESH...
   #Elements         1728
   WRITE DATA TO VTX XML BINARY (VTU) FILE... NACA0012_Debugmesh.vtu   DONE
    Mesh visualized for debug purposes in file : NACA0012_Debugmesh
DONE!   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   [ time: .003s ]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WRITING THE BC MESH...
   #BCSides         1928
   WRITE DATA TO VTX XML BINARY (VTU) FILE... NACA0012_Debugmesh_BC.vtu   DONE
    Boundary mesh visualized for debug purposes in file : NACA0012_Debugmesh_BC
DONE!   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   [ time: .003s ]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WRITE CURVED SURFACE VISUALIZATION...
   #CurvedSurfaces:       32
   WRITE DATA TO VTX XML BINARY (VTU) FILE... NACA0012_SplineSurf.vtu   DONE
DONE!   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   [ time: .001s ]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WRITE CURVED VOLUME VISUALIZATION...
   #CurvedElements:     1728
   WRITE DATA TO VTX XML BINARY (VTU) FILE... NACA0012_SplineVol.vtu   DONE
DONE!   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   [ time: .217s ]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Check Elements Jacobian...
 Number of element with scaled Jacobians ranging between:
   <  0.0  <  0.1  <  0.2  <  0.3  <  0.4  <  0.5  <  0.6  <  0.7  <  0.8  <  0.9  <  1.0 
     0 |     0 |     0 |     0 |   136 |   596 |   748 |   200 |    12 |    36 |     0 | 
DONE!   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   [ time: .038s ]
====================================================================================================================================
 
 
                                        GOT mesh (incl. rasterfahndung) 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 WRITE DATA TO HDF5 FILE...
 Mesh statistics:
 Element Type | number of elements
 104        |        0
 204        |        0
 105        |        0
 115        |        0
 205        |        0
 106        |        0
 116        |        0
 206        |        0
 108        |        0
 118        |        0
 208        |     1728
DONE!   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   [ time: .009s ]
DONE!   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   [ time: .397s ]
====================================================================================================================================
 HOPR successfully finished: Mesh "NACA0012_mesh.h5" written to HDF5 file.
====================================================================================================================================